We are pro6com

Pro6com is not just a consultancy agency that makes plants safer and more efficient. We prefer to call ourselves resultants. These are consultants who help to achieve the result.

From Vlaardingen we work for the chemical industry, innovative start-ups, and knowledge institutions with complex production processes. We make the invisible process safety risks visible. We show where unnecessary energy is used. And we bridge the gap between innovation and the existing industry.

» We create value for our customers by making their invisible process safety risks and energy or production losses visible. This allows targeted actions to be taken to reduce these risks and optimise plant performance.

We do this by focusing on the entire process safety lifecycle. We carry out safety studies, design the protective layers and help to test their operation against the practical situation.

"Creating a better world by making processes safer and more efficient"

The pro6com team

Meet our team

Six people have seen that it is quite a challenge to keep up with the latest safety standards. That a better result can be achieved with less energy and raw materials. And that it really is an art to turn an idea into a fully-fledged production process.

Enrico Lammers

MANAGING DIRECTOR | PROCESS ENGINEERING CONSULTANT

  • 25+ years of process and operations engineering and consultancy experience in the chemical industry.

  • Optimisation of plants for quality and safety control, cost and energy reduction and capacity expansion. Troubleshooting, incident investigation and R&D

  • Commissioning and start-up experience in large petrochemical plants

  • “I believe that conducting studies alone does not make a plant safer or more efficient and therefore I do not only focus on the studies themselves, but also on the implementation of the recommendations from these studies. That is why I am called a resultant rather than a consultant”

Jan Hartlief

FUNCTIONAL SAFETY ENGINEER

  • 40 years hands-on experience as Functional Safety and Controls & Instrumentation engineer in the chemical and oil industry

  • TÜV Rheinland Functional Safety Engineer SIS and Machine Safety

  • Process control, (Functional) Safety Assessments, aeShield® expert, SIL, Cause & Effect and Test procedures. Total Safety Life cycle. IEC61511, IEC61508 and IEC62061

  • "By conducting interviews and asking the right questions, I am able to carry out a full Safety Assessment in a plant in a short period of time. You immediately have insight into where the non-compliance issues are and how you can solve them.

Remco van Lenthe

SENIOR PROCESS ENGINEER

  • 8 years process and design experience in the process industry

  • Optimisation of heat calculations. Process optimisation of offshore and utilities projects. Process engineering of management of change on pilot plants and other technical installations. Experience with biogas plants and pilot plants.

  • "With my no-nonsense mentality, by zooming in on the installation I quickly get to the heart of the matter.

Jasmijn Meijers

BUSINESS DEVELOPMENT MANAGER / PROCESS ENGINEERING CONSULTANT 

  • 20+ years of proposal, basic and detailed process engineering experience in process and chemical industries

  • Diagnostic Business Development

  • Column design and optimisation, source analysis

  • "I ask the questions: Where can you and should you be compliant? Where can you and do you want to optimise or innovate and become more sustainable? In the role of Business developer with an engineering background, I devise solutions for challenges in the production process together with pro6com colleagues and plant owners".

Madelien Tjokrodikoro

PROJECT COORDINATOR

  • 13 years of experience in office management and customer relations

  • Finance & billing
  • "I am the silent force in the background and the controller who makes sure that everything runs smoothly at pro6com. I am also the first point of contact at pro6com".

Dimitri Quist

SR. PROCESS SAFETY CONSULTANT 

  • Over 25 years of experience in quality, occupational health and safety, environmental and (process) safety management within the manufacturing, (petro-) chemical and offshore industries.

  • Environmental/environmental engineer, RvA/UKAS approved Lead auditor QHSE and safety expert.

  • HAZOP leader, PSSR assessments, BowTieXP Practitioner & facilitator, incident investigation (RCA & Tripod) and SEVESO/BRZO assessments.

  • "Because of my broad multidisciplinary background, I am able to get to the bottom of an organization and/or process in a short period of time. Based on my analyses, I discover the strengths and weaknesses and can then link to them the right disciplines & people to achieve a better organization or more optimal process."

Michelle Liebregts

JUNIOR PROCESS ENGINEER

  • Process engineering and optimisation. Affinity with fluid dynamics and thermodynamics.

  • Bachelor of Science in Chemical Engineering

  • "I have never done it before, so I think I can do it. This quote is written on my body. I am eager to learn and I do not shy away from challenges.

Helene Wuts

FUNCTIONAL SAFETY & PROCESS ENGINEER

  • 20+ years of Functional Safety and Process Engineering experience in process and chemical industry

  • TÜV Rheinland Functional Safety Engineer SIS and Machine safety

  • Specializing in the application of IEC 61511 in the chemical industry. SIL Verifications and calculation, Functional Safety Assessments, Field Verification, Safety Requirement Specifications and preparation of proof test procedures.

  • "I have found that it is important to go through all the steps in the Safety Life Cycle and that with the design of a Safety feature alone, a plant does not become safer."

Lourens du Plessis

Functional safety & process control engineer

  • 20 years of experience as a functional safety and control engineer in the petrochemical industry.

  • TÜV Rheinland Functional Safety Engineer SIS

  • Specialised in the application of IEC 61511 in the petrochemical industry. SIL verifications and calculations, Functional Safety Assessments, Prior use assessments, Safety Requirement Specifications and drafting of proof test procedures.

  • Devising process control & safeguarding philosophies

  • "I particularly enjoy the challenges involved in implementing IEC 61511 in existing plants because it requires a good understanding of customer needs, together with a deeper knowledge of process technology and functional safety principles."

Mike van Laere

Junior engineer Process engineering, optimization & process safety

  • Student Bachelor of Science in Chemical Engineering

  • "Through my work experience in the chemical industry, I am driven to make a plant work as well and safely as possible. I want to further fulfill this role by exploring the various disciplines such as process engineering and process safety. By mastering and executing this combination, no problem is too big"

Desire Daans

Junior process engineer, optimization & process safety

  • Specialized in Process engineering and optimization. Affinity with process safety and thermodynamics.

  • Bachelor of Science in Chemical Engineering

  • "I have always believed that if you put in the work, the results will come." Because of my drive, I will always go for the maximum achievable out of myself & any process.

Niels Warning

Process engineer

  • Specialized in Process engineering and optimization. Affinity with process safety and the energy transition.

  • Bachelor of Science in Chemical Engineering

  • "I If I had to describe myself in a few words I do things with passion, I am curious and will always strive for a high level. These traits often allow me to come up with great solutions"

Enrico Lammers

MANAGING DIRECTOR | PROCESS ENGINEERING CONSULTANT

  • 25+ years of process and operations engineering and consultancy experience in the chemical industry.

  • Optimisation of plants for quality and safety control, cost and energy reduction and capacity expansion. Troubleshooting, incident investigation and R&D
  • Commissioning and start-up experience in large petrochemical plants

  • “I believe that conducting studies alone does not make a plant safer or more efficient and therefore I do not only focus on the studies themselves, but also on the implementation of the recommendations from these studies. That is why I am called a resultant rather than a consultant”

Jan Hartlief

FUNCTIONAL SAFETY ENGINEER

  • 40 years hands-on experience as Functional Safety and Controls & Instrumentation engineer in the chemical and oil industry

  • TÜV Rheinland Functional Safety Engineer SIS and Machine Safety

  • Process control, (Functional) Safety Assessments, aeShield® expert, SIL, Cause & Effect and Test procedures. Total Safety Life cycle. IEC61511, IEC61508 and IEC62061
  • "By conducting interviews and asking the right questions, I am able to carry out a full Safety Assessment in a plant in a short period of time. You immediately have insight into where the non-compliance issues are and how you can solve them.

Remco van Lenthe

SENIOR PROCESS ENGINEER

  • 8 years process and design experience in the process industry

  • Optimisation of heat calculations. Process optimisation of offshore and utilities projects. Process engineering of management of change on pilot plants and other technical installations. Experience with biogas plants and pilot plants.
  • "With my no-nonsense mentality, by zooming in on the installation I quickly get to the heart of the matter.

Michelle Liebregts

JUNIOR PROCESS ENGINEER

  • Process engineering and optimisation. Affinity with fluid dynamics and thermodynamics.

  • Bachelor of Science in Chemical Engineering

  • "I have never done it before, so I think I can do it. This quote is written on my body. I am eager to learn and I do not shy away from challenges.

Jasmijn Meijers

BUSINESS DEVELOPMENT MANAGER / PROCESS ENGINEERING CONSULTANT

  • 20+ years of proposal, basic and detailed process engineering experience in process and chemical industries

  • Diagnostic Business Development
  • Column design and optimisation, source analysis

  • "I ask the questions: Where can you and should you be compliant? Where can you and do you want to optimise or innovate and become more sustainable? In the role of Business developer with an engineering background, I devise solutions for challenges in the production process together with pro6com colleagues and plant owners".

Dimitri Quist

SR. PROCESS SAFETY CONSULTANT 

  • Over 25 years of experience in quality, occupational health and safety, environmental and (process) safety management within the manufacturing, (petro-) chemical and offshore industries.

  • Environmental/environmental engineer, RvA/UKAS approved Lead auditor QHSE and safety expert.

  • HAZOP leader, PSSR assessments, BowTieXP Practitioner & facilitator, incident investigation (RCA & Tripod) and SEVESO/BRZO assessments.

  • "Because of my broad multidisciplinary background, I am able to get to the bottom of an organization and/or process in a short period of time. Based on my analyses, I discover the strengths and weaknesses and can then link to them the right disciplines & people to achieve a better organization or more optimal process."

Madelien Tjokrodikoro

PROJECT COORDINATOR

  • 13 years of experience in office management and customer relations

  • Finance, invoicing and project coordination

  • "I am the quiet force in the background and the regulator who ensures that everything runs smoothly at pro6com.

Lourens du Plessis

FUNCTIONAL SAFETY & PROCESS CONTROL ENGINEER

  • 20 years of experience as a functional safety and control engineer in the petrochemical industry.

  • TÜV Rheinland Functional Safety Engineer SIS

  • Specializing in the application of IEC 61511 in the petrochemical industry. SIL verifications and calculation, Functional Safety Assessments, Prior use assessments, Safety Requirement Specifications and preparation of proof test procedures.

  • Devising process control & safeguarding philosophies

  • "I particularly enjoy the challenges involved in implementing IEC 61511 in existing plants because it requires a good understanding of customer needs, together with a deeper knowledge of process technology and functional safety principles."

Helene Wuts

FUNCTIONAL SAFETY & PROCESS ENGINEER

  • 20+ years of Functional Safety and Process Engineering experience in process and chemical industry

  • TÜV Rheinland Functional Safety Engineer SIS and Machine safety

  • Specializing in the application of IEC 61511 in the chemical industry. SIL Verifications and calculation, Functional Safety Assessments, Field Verification, Safety Requirement Specifications and preparation of proof test procedures.

  • "I have found that it is important to go through all the steps in the Safety Life Cycle and that with the design of a Safety feature alone, a plant does not become safer."

Desire Daans

JUNIOR PROCESS ENGINEER, OPTIMIZATION & PROCESS SAFTY

  • Specialized in Process engineering and optimization. Affinity with process safety and thermodynamics.

  • Bachelor of Science in Chemical Engineering

  • "I have always believed that if you put in the work, the results will come." Because of my drive, I will always go for the maximum achievable out of myself & any process.

Mike van Laere

Junior engineer Process engineering, optimization & process safety

  • Student Bachelor of Science in Chemical Engineering

  • "Through my work experience in the chemical industry, I am driven to make a plant work as well and safely as possible. I want to further fulfill this role by exploring the various disciplines such as process engineering and process safety. By mastering and executing this combination, no problem is too big"

Niels Warning

PROCESS ENGINEER

  • Specialized in Process engineering and optimization. Affinity with process safety and the energy transition.

  • Bachelor of Science in Chemical Engineering

  • "If I had to describe myself in a few words I do things with passion, I am curious and will always strive for a high level. These traits often allow me to come up with great solutions"